UV Dynamics 30gpm to 40gpm UV Disinfection System with Sensor 1" MIPT

Features -

• Flow rate of 40gpm (151L/min) delivers UV dose of 30mj/cm2
• Flow rate of 30gpm (113L/min) delivers UV dose of 40mj/cm2
• Easy-service lamp connector simplifies maintenance - no tools required.
• Microprocessor controlled power source includes audible and visible lamp failure alarms, lamp life remaining feature, and annual lamp change timer.
• UV lamps are USA manufactured with a long-life coating, rated for 9,000hrs
• Reactor chambers are welded in Canada using 304 stainless steel.
• Power sources and chambers are designed and manufactured in Canada.
• 24-hour alarm override option available.
• Includes optional solenoid valve output.
• Inlet/Outlet Port Size - 1” MNPT
• Max Operating Pressure - 100psi (6.9bar)
• Water Temperature - 4 - 37°C (40-99°F)
• Power Consumption - 117 watts
• AC Supply Voltage - 120V or 240V (47-63Hz)
• Chamber Dimensions - 50.5” (128cm) x 3.5” (8.89cm)
• UV Dynamics number - UVD1200/S, 400389

Guidelines -

• A Minimum 5 micron pre-filter required.
• Indoor use only - Select a mounting location for UV power source to protect it from condensation from the disinfection chamber and system piping.
• Clean the quartz sleeve regularly
• Install a Surge Protector as UV dynamics voids warranty when installed without a surge protector

Water must meet the following minimum requirements for trouble free operation -

• Turbidity: < 1 NTU
• Suspended Solids: < 10mg/L
• Colour: None
• Total Iron: < 0.3 mg/L
• Manganese: < 0.05 mg/L
• Hardness: < 7 gpg
• UVT%: > 80%

Certified by IAPMO R&T against -

• NSF/ANSI 61 (materials safety only)
• NSF/ANSI 372 (lead free compliance)
• CSA-B483.1