UV Dynamics 20.2gpm NSF Certified UV Disinfection system, 1" MIPT x 1" MIPT

Features –

• Flow rate of 20gpm (75L/min) delivers UV dose of 40mj/cm2
• NSF/ANSI 55 Class "A" Certified Series
• Passivated and polished 304 stainless steel reactor chamber measuring 3.5" x 50.5"
• 9000hr long life coated UV lamp
• Microprocessor controlled UV power source with audible and visible lamp failure alarms and two digit display
• True Lamp Current closed loop current control
• Annual lamp change reminder timer
• Lamp life remaining feature
• Inlet - 1" MNPT, Outlet - 1" MNPT
• Dynamic flow regulator
• Cold Spot Fan
• No tools required for regular servicing
• Easy-service lamp connector
• Optional solenoid valve
• UV Dynamics number - UVD-2040C, UVD 20.40C, 400342

Guidelines -

• A Minimum 5 micron pre-filter required.
• Indoor use only - Select a mounting location for UV power source to protect it from condensation from the disinfection chamber and system piping.
• Clean the quartz sleeve regularly
• Install a Surge Protector as UV dynamics voids warranty when installed without a surge protector

Water must meet the following minimum requirements for trouble free operation -

• Turbidity: < 1 NTU
• Suspended Solids: < 10mg/L
• Color: None
• Total Iron: < 0.3 mg/L
• Manganese: < 0.05 mg/L
• Hardness: < 7 gpg
• UVT%: > 80%

Certified by IAPMO R&T against -

• NSF/ANSI 55 Class “A”
• NSF/ANSI 61 (materials safety only)
• NSF/ANSI 372 (lead free compliance)
• CSA-B483.1