UV Dynamics 10gpm to 13gpm UV Disinfection System 3/4" MIPT

Features –

• Flow rate of 13gpm (23L/min) delivers UV dose of 30mj/cm2
• Flow rate of 10gpm (19L/min) delivers UV dose of 40mj/cm2
• Passivated and polished 304 stainless steel reactor measuring 3.5" x 22"
• 9000hr long life coated UV lamp
• Microprocessor controlled UV power source with audible and visible lamp failure alarms
• Annual lamp change reminder timer
• Lamp life remaining feature
• 3/4" MNPT fittings
• Domed quartz sleeve to simplify servicing
• No tools required for regular servicing
• Easy-service lamp connector
• UV Dynamics number - UVD400E, UVD400.120LLE, 400117

Guidelines -

• A Minimum 5 micron pre-filter required.
• Indoor use only - Select a mounting location for UV power source to protect it from condensation from the disinfection chamber and system piping.
• Clean the quartz sleeve regularly
• Install a Surge Protector as UV dynamics voids warranty when installed without a surge protector

Water must meet the following minimum requirements for trouble free operation -

• Turbidity: < 1 NTU
• Suspended Solids: < 10mg/L
• Color: None
• Total Iron: < 0.3 mg/L
• Manganese: < 0.05 mg/L
• Hardness: < 7 gpg
• UVT%: > 80%

Certified by IAPMO R&T against -

• NSF/ANSI 61 (materials safety only)
• NSF/ANSI 372 (lead free compliance)
• CSA-B483.1