6-Inch - 25HP 575V 3 Phase Encapsulated Motor

Ratings

• HP 25 hp
• Frequency 60 Hz
• Phases Three-Phase
• Amps - Full Load 26.8 A
• Amps - Service Factor 30 A
• Volts 575 VAC
• Voltage Tolerance (%) -10.0% / +10.0%
• Wire 3-Wire
• Motor Connection DOL
• Thrust Bearing Rating 3500 lb
• Lead Length 13 ft
• Motor Encapsulated
• Continuous Duty Yes
• Efficiency Service Factor Load [%] 83.00 %
• Protection [IP] IP68
• Lead Wire Size AWG #10
• Lead Retainer Method Lead Jam Nut
• Motor Insulation Classification F
• Poles 2
• S.F. 1.15

Operation

• Motor Cooling Water
• Minimum Cooling Flow .50 ft/sec
• Motor Ambient Temperature Rating Nominal 30 °C
• Thrust Bearing Rating 3500 lb
• Motor Adapter Double flange
• Rotation Counter clockwise facing the shaft
• SubTrol Heat Sensor No
• Winding Resistance (Main Winding) 1.0-1.3

Materials of Construction

• Motor Shaft End - Material 304 SS
• Thrust Bearing Kingsbury Type
• Seal Material Silicon Carbide / Silicon Carbide
• Seal Mechanical Seal
• Lead Insulation Material Overmolded
• Diaphragm Material Nitrile Rubber (NBR)
• Motor Bottom End Bell Material Cast Iron with E-Coat Paint
• Motor Fill Solution (Water Soluble / Non Toxic) Yes
• Motor Fill Solution FES91
• Motor Top End Bell Material Cast Iron with E-Coat Paint
• Shaft Slinger Material Nitrile Rubber (NBR)
• Stator Ends Material Carbon Steel
• Stator Fill Resin
• Stator/ Motor Shell Material 300 Series SS
• Winding Material Copper

Dimensions

• Motor Diameter - Physical Diameter 5.44"
• Motor Length 36 "
• Product Weight 149 lb
• Product Weight with Pack 158 lb
• Carton Length 42.25 "
• Carton Width 7.25 "
• Carton Height 10.5 "
• Shaft Diameter 1 "
• Shaft End Spline

Other

• Drinking Water Agency Approvals ANSI/NSF Standard 61
• Electrical Agency Approvals UL
• Warranty Standard Time 12 Month Install / 24 Month Manufacturing
• Repair Kit Available Yes